Warranty and Care Information
Thank you for purchasing our fins.
Passing through the hands of our skilled craftspeople up to 20 processes are involved in creating each Alkali Fin. Cut and foiled from hand-laid fibreglass panels, the result is a fin with lively and responsive flex that you will enjoy through every turn.
WARRANTY
We offer a 2 year warranty against manufacturing defects. This does not cover normal wear and tear due to ongoing use.
Please pay particular attention to the care tips below:
CARE
Avoid excess pressure against your fins, especially in hot places like your car in summer. Heat + Pressure = warp.
To prolong the life of the bases of your fins, they should be removed from fin boxes after each use or as frequently as possible, especially short board fins. Water pools in the fin boxes and trapped water can weaken the structure of the fin bases over time.
Sharp edges can be sanded lightly with 400-600 grit sandpaper.
Chips and scratches from rocks can be sanded back with 120 grit sandpaper, then finish sand with 240 to 600 grit wet/dry. There is no need for resin repair on our fibreglass fins.
PLEASE DO NOT SAND YOUR FINS WITHIN THE 2 YEAR WARRANTY PERIOD WITHOUT CONTACTING US FIRST AS THE WARRANTY COULD BE VOIDED.
For any warranty questions/concerns, or fin care info please contact us on sales@alkalifins.com.au